CY62157G30-45ZXA
现货,推荐
符合RoHS标准
无铅

CY62157G30-45ZXA

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

CY62157G30-45ZXA
CY62157G30-45ZXA


商品详情

  • 实时时钟
    N
  • 密度
    8 MBit
  • 峰值回流温度
    260 °C
  • 工作温度 范围
    -40 °C 至 85 °C
  • 工作电压 (VCCQ) 范围
    2.2 V 至 3.6 V
  • 工作电压 范围
    2.2 V 至 3.6 V
  • 引线球表面
    Pure Sn
  • 接口
    Parallel
  • 目前计划的可用性至少到
    2033
  • 看门狗定时器
    N
  • 系列
    MoBL™ SRAM
  • 组织(X x Y)
    512Kb x 16
  • 警报
    N
  • 质量等级
    Automotive(A)
  • 速度
    45 ns

OPN
CY62157G30-45ZXA
产品状态 active and preferred
英飞凌封装名称
封装名 TSOP-I-48 (51-85183)
封装尺寸 960
封装类型 TRAY
湿度 3
防潮封装 DRY
无铅 Yes
无卤素 Yes
符合RoHS标准 Yes
预估长期供货截止日期 2033
产品发布日期 03/2022
封装产地
TH
晶圆产地
TW

产品状态
Active
英飞凌封装名称
封装名 TSOP-I-48 (51-85183)
封装尺寸 960
封装类型 TRAY
湿度 3
防潮封装 DRY
无铅
无卤素
符合 RoHS 标准
预估长期供货截止日期 2033
产品发布日期 03/2022
封装产地
TH
晶圆产地
TW
CY62157G30-45ZXA is an AEC-Q100 qualified 8-Mbit (512K × 16) asynchronous SRAM with embedded ECC for single-bit error correction. It operates from 2.2 V to 3.6 V over -40°C to 85°C and delivers 45 ns access time. Low-power modes include automatic power-down/standby at 1.4 µA typical (6.5 µA max) plus 1.5 V data retention for battery-backed systems. The ZXA option comes in a Pb-free 48-pin TSOP I package.

特性

  • 8-Mbit SRAM (512K x 16)
  • ECC corrects single-bit errors
  • 45 ns/55 ns read/write cycles
  • VCC 1.65-2.2 V or 2.2-3.6 V
  • 5 µA typical standby current
  • 35 µA max standby current
  • 16-bit I/O bus (I/O0 to I/O15)
  • Byte write with BHE/BLE enables
  • Dual chip-enable inputs CE1/CE2
  • I/O Hi-Z on deselect or OE high
  • Input/output leakage ±1 µA
  • 1.5-V data retention support

产品优势

  • ECC helps prevent data corruption
  • 45 ns enables fast CPU reads
  • Two VCC ranges ease rail reuse
  • 5 µA standby extends battery life
  • 35 µA max simplifies power budget
  • 16-bit bus increases data bandwidth
  • Byte writes reduce bus transactions
  • Dual CE supports easy bus sharing
  • Hi-Z outputs avoid bus contention
  • ±1 µA leakage lowers static loss
  • Data retention keeps state at 1.5 V
  • Standard OE/WE controls simplify HW

应用

文档

设计资源

开发者社区