CY7C1472BV33-167AXI
现货，推荐
符合RoHS标准
无铅

CY7C1472BV33-167AXI

数据手册
封装

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

CY7C1472BV33-167AXI
CY7C1472BV33-167AXI
数据手册


商品详情

  • ECC
    N
  • Frequency
    167 MHz
  • 密度
    72 MBit
  • 峰值回流温度
    260 °C
  • 工作温度 范围
    -40 °C 至 85 °C
  • 工作电压 范围
    3.14 V 至 3.63 V
  • 引线球表面
    Pure Sn
  • 接口
    Parallel
  • 数据宽度
    x 18
  • 架构
    NoBL, Pipeline
  • 片上端接
    N
  • 系列
    NoBL
  • 组织(X x Y)
    4Mb x 18
  • 读取延迟(周期)
    1
  • 质量等级
    Industrial
  • 银行切换
    N

推荐的
OPN
CY7C1472BV33-167AXI
产品状态 active and preferred
英飞凌封装名称
PG-TQFP-100
封装名 TQFP-100 (51-85050)
封装尺寸 144
封装类型 TRAY
湿度 3
防潮封装 DRY
无铅 Yes
无卤素 Yes
符合RoHS标准 Yes
封装产地
TW
晶圆产地
US

产品状态
Active
英飞凌封装名称
PG-TQFP-100
封装名 TQFP-100 (51-85050)
封装尺寸 144
封装类型 TRAY
湿度 3
防潮封装 DRY
无铅
无卤素
符合 RoHS 标准
封装产地
TW
晶圆产地
US
CY7C1472BV33-167AXI is a 72-Mbit (4M × 18) synchronous pipelined burst SRAM with NoBL architecture for zero-wait-state read/write transitions. It runs from a 3.3 V core supply with 3.3 V/2.5 V I/O and supports 167 MHz bus operation. Fully registered inputs/outputs enable 4-word linear or interleaved bursts, with byte-write via BWa/BWb, CEN clock gating, ZZ sleep mode, and IEEE 1149.1 JTAG boundary scan.

特性

  • 72-Mbit sync pipelined SRAM
  • No Bus Latency (NoBL) logic
  • 250 MHz bus ops, zero wait states
  • Registered inputs and outputs
  • Linear or interleaved burst order
  • Byte write with BWx byte selects
  • VDD 3.135 V to 3.6 V single rail
  • VDDQ I/O: 2.5 V or 3.3 V
  • 3.0 ns clock-to-output (250 MHz)
  • ZZ sleep mode and Stop Clock
  • IEEE 1149.1 JTAG boundary scan
  • Neutron SER: 361 FIT/Mb typ, 25C

产品优势

  • Run back-to-back ops with no stalls
  • More throughput each clock cycle
  • Drop-in path for ZBT designs
  • Predictable timing simplifies closure
  • Burst support fits streaming data
  • Byte writes cut rewrite bandwidth
  • Single-rail core eases power design
  • Direct 2.5/3.3 V logic connection
  • 3.0 ns tCO reduces read latency
  • Sleep/stop clock cuts idle power
  • JTAG simplifies board test & debug
  • Lower soft-error risk in systems

应用

文档

设计资源

合作伙伴解决方案

开发者社区