BTS80022-SWPF-1ES
新品
按需供应
符合RoHS标准
无铅

BTS80022-SWPF-1ES

新品
12 V | 2.6 mΩ | 21.6 A | I²t wire protection | SPI | 1ch smart HS switch | ISO 26262-compliant | PG-TSDSO-24 | SPOC™ Wire Guard 12V
封装

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BTS80022-SWPF-1ES
BTS80022-SWPF-1ES


商品详情

  • Configurable overcurrent protection 范围
    47.2 A 至 131.6 A
  • Extended operating voltage 范围
    2.8 V 至 28 V
  • I²t 线路保护范围 范围
    13.4 A 至 24 A
  • 安装
    SMT
  • 工作温度 范围
    -40 °C 至 150 °C
  • 推荐工作电压 范围
    5 V 至 20 V
  • 目前计划的可用性至少到
    2040
  • 系列
    SPOC™ Wire Guard 12V
  • 认证
    ISO 26262-compliant
  • 诊断
    Analog, digital diagnosis
  • 负载电流
    21.6 A
  • 质量等级
    Automotive
  • 通道
    1

OPN
BTS80022SWPF1ESXUMA1
产品状态 on request
英飞凌封装名称
PG-TSDSO-24
封装名 N/A
封装尺寸 3000
封装类型 TAPE & REEL
湿度 2a
防潮封装 DRY
无铅 Yes
无卤素 Yes
符合RoHS标准 Yes
封装产地
MY
晶圆产地
AT

产品状态 on request
英飞凌封装名称
PG-TSDSO-24
封装名 -
封装尺寸 3000
封装类型 TAPE & REEL
湿度 2a
防潮封装 DRY
无铅
无卤素
符合 RoHS 标准
封装产地
MY
晶圆产地
AT
The BTS80022-SWPF-1ES is a single-channel high-side power switch and member of the SPOC™ Wire Guard family. The device is providing protection functions like configurable I²t wire protection and overcurrent limitation. It also features Idle Mode, Non-volatile memory, enhanced digital diagnosis (incl. pre-warning) and Capacitive load switching mode.

特性

  • High-side switch with self protection
  • Daisy chain capable 24-bit SPI with CRC
  • SPI configurable I²t wire protection
  • SPI configurable overcurrent limitation
  • SPI configurable device configuration
  • Active supply during parking (Idle mode)
  • Enhanced digital diagnosis, pre-warning
  • SPI configurable undervoltage lockout
  • Non-volatile memory
  • Switchability check to diagnose stuck ON
  • Capacitive load switching mode
  • ISO 26262 compliant

产品优势

  • High configurability via software
  • Precise isothermal wire protection
  • Load shedding to protect power supply
  • Integrated fast failure isolation
  • Customer configurable safe state via NVM
  • Support of fast system start up
  • Charging of capacitors up to 7mF
  • Unload microcontroller by pre-warning
  • Support operation without logic supply
  • Idle mode with low power consumption
  • Dynamic load control during parking
  • ISO 26262-compliant up to ASIL-D

应用

文档

设计资源

合作伙伴解决方案

开发者社区