现货,推荐
符合RoHS标准
无铅

TLE42994G

TLE42994G 是一款单片集成低压差稳压器,专为需要在汽车发动机关闭时处于开启状态的汽车应用而设计。
多个 OPN 可用
每件.

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

商品详情

  • Hold
    no
  • Accuracy
    2 %
  • Dropout Voltage
    220 mV
  • Enable (=Inhibit)
    no
  • Reset
    yes
  • Operating Temperature
    -40 °C to 150 °C
  • Operating Voltage
    5.5 V to 45 V
  • Status Output
    no
  • Power Fail
    no
  • Power Good
    no
  • Watchdog
    no
  • Family
    OPTIREG™ linear General Purpose
  • Currently planned availability until at least
    2038
  • Qualification
    Automotive
  • Regulator Type
    General Purpose
  • Output Voltage Type
    5.0 V
  • Output Current max
    150 mA
  • Over Voltage Protection
    no
  • Quiescent Current
    65 µA
  • Budgetary Price €/1k
    0.62
  • Early Warning
    yes
OPN
TLE42994GXUMA3 TLE42994GXUMA1
产品状态 active and preferred not for new design
英飞凌封装名称
封装名 N/A N/A
包装尺寸 2500 2500
包装类型 TAPE & REEL TAPE & REEL
湿度 2a 3
防潮包装 DRY DRY
无铅 Yes Yes
无卤素 Yes Yes
符合RoHS标准 Yes Yes
Infineon stock last updated:
每件. 有存货

产品状态
Active
英飞凌封装名称
封装名 -
包装尺寸 2500
包装类型 TAPE & REEL
湿度 2a
防潮包装 DRY
无铅
无卤素
符合 RoHS 标准
每件.
有存货

产品状态 not for new design
英飞凌封装名称
封装名 -
包装尺寸 2500
包装类型 TAPE & REEL
湿度 3
防潮包装 DRY
无铅
无卤素
符合 RoHS 标准
高达 45V 的输入电压被调节至 3.3V 输出。处理高达 150mA 的负载。短路保护、过温关断和 VQrt(通常为 3.1V)的复位信号。可编程上电复位延迟。用于电压监控和欠压检测的感测比较器。启用/禁用功能可在禁用时将电流降低至 <1uA。

特性

  • 输出电压 3.3 V ± 2 %
  • 输出电流高达 150 mA
  • 导通状态下低电流消耗
  • 电流消耗低于 1uA
  • 早期预警
  • 带 PDT 的欠压复位
  • 可调复位阈值
  • 极低压差
  • 输出电流限制
  • 反极性保护
  • 过温保护

产品优势

  • 强大的保护功能
  • 宽输入和温度范围操作

图表

TLE42994G-Block-Diagram
TLE42994G-Block-Diagram
TLE42994G-Block-Diagram TLE42994G-Block-Diagram TLE42994G-Block-Diagram

文档

设计资源

开发者社区

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "向社区提问", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "查看所有讨论", "labelEn" : "View all discussions" } ] }